Structural Performance of Reinforced Concrete Beams with Steel Fibres as Secondary Reinforcement: Experimental and Pre-peak Numerical Modelling
This research consists of an experimental and a numerical investigation into improving the structural performance of reinforced concrete (RC) beams by incorporating hooked-end steel fibres. Experimentally, steel fibres were added to the concrete matrix of 80 mm × 180 mm × 1500 mm RC beams with fibr...
Saved in:
| Main Authors: | , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
University Amar Telidji of Laghouat
2024-12-01
|
| Series: | Journal of Building Materials and Structures |
| Subjects: | |
| Online Access: | http://journals.lagh-univ.dz/index.php/jbms/article/view/4084 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | This research consists of an experimental and a numerical investigation into improving the structural performance of reinforced concrete (RC) beams by incorporating hooked-end steel fibres. Experimentally, steel fibres were added to the concrete matrix of 80 mm × 180 mm × 1500 mm RC beams with fibre contents of 0%, 0.5%, and 1%, without replacing traditional reinforcement bars. Each beam underwent a four-point flexural test using a hydraulic press under static loading to evaluate the influence of fibres on flexural behaviour. The numerical analysis aimed to model the macro-scale flexural behaviour of RC beams using a 3D finite element approach in ABAQUS. Challenges in modelling steel fibres include their discrete nature and computational demands due to intricate meshing and convergence issues. The Simplified Concrete Damaged Plasticity Model was used to characterize the compressive and tensile behaviours of plain and steel fibre reinforced concretes. Nonlinear finite element analysis was performed to predict pre-peak load versus mid-span deflection and crack propagation. The model, which does not explicitly simulate steel fibres, was validated against experimental data, showing strong agreement and confirming its effectiveness in capturing the flexural behaviour of steel fibre reinforced concrete beams. Experiments Results showed that steel fibres enhance the flexural performance. Beams with steel fibres exhibited higher first crack loads, ultimate loads, flexural strengths, and toughness. Additionally, the fibres increased crack numbers, reduced crack spacing and length, and improved post-cracking behaviour. The simulation results were subsequently validated against experimental data. The results of the numerical finite element analysis were in good agreement with those of the experiments.
|
|---|---|
| ISSN: | 2353-0057 |