Laser Velocimeter Measurements in the Pump of an Automotive Torque Converter Part I – Effect of Speed Ratio
A torque converter was tested at four turbine/pump rotational speed ratios (0.200, 0.400, 0.600, and 0.800) all with a constant pump rotational speed in order to determine the effect of speed ratio on the torque converter pump flow field. Laser velocimetry was used to measure three components of vel...
Saved in:
| Main Authors: | Steven B. Ainley, Ronald D. Flack, Klaus Brun, Tony J. Rovello |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
Wiley
2000-01-01
|
| Series: | International Journal of Rotating Machinery |
| Subjects: | |
| Online Access: | http://dx.doi.org/10.1155/S1023621X00000166 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
Similar Items
-
Laser Velocimeter Measurements in the Pump of an Automotive Torque Converter Part II – Effect of Pump Speed and Oil Viscosity
by: Ronald D. Flack, et al.
Published: (2000-01-01) -
Laser Velocimetry Measurements in a Double Volute Centrifugal Pump
by: William De Ojeda, et al.
Published: (1995-01-01) -
Torque (Performance) Analysis, Exhaust Gas Emissions and Exhaust Flow Modeling Variation of Catalytic Converter Filter Number
by: Hajar Isworo, et al.
Published: (2024-11-01) -
Flow Field in the Turbine Rotor Passage in an Automotive Torque Converter Based
on the High Frequency Response Rotating Five-hole Probe Measurement Part II: Flow field at the off-design condition and effects of speed ratio
by: Y. F. Liu, et al.
Published: (2001-01-01) -
Flow Field in the Turbine Rotor Passage
in an Automotive Torque Converter Based on the High
Frequency Response Rotating Five-hole Probe
Measurement Part I: Flow Field at the Design Condition (Speed Ratio 0.6)
by: Y. F. Liu, et al.
Published: (2001-01-01)